103VA AC 60-500V 1000A Digital Voltmeter Ammeter Din Rail Volt Current Meter with CT Voltage Ampere Test Tool LED Amp Tester

AmmetersAttention:This meter is designed using the principle of capacitor , because the higher the frequency of the capacitor impedance is smaller, so it is not suitable for high frequency electronic speed regulation, non-sinusoidal wave, or other occasions with high frequency components, otherwise it is easy to burn.In the selection of the test range, not the larger the range, the better, the larger the range, the greater the error. It is recommended to select 1.5 times or 2 times of the actual test value.Instruciton of connection diagram.External CT:terminals and connect to measuring voltage, connect the wire of CT to termianl and , then pass the wire of test loop once through the hole of CT. Note: The ammeter CT cannot be connected to the ground or metal case.The test value of this meter is average value.The din rail is not included with the meterTechnical Parameters:Test voltage: AC 60-500VTest current: AC 0-1000ADimension: 80*36*64mmInstallation methon: din rail 35mm.Display mode: 0.36 "LED with Red digits for voltage and Green digits for current.<;0.5WMeasurement accuracy: 1% (± 2 digits)Measurement rate: 2 times/SNote: If any of the above options you need cannot be found in the product link. Please contact with customer service.Connection Diagram: Note:The din rail & 2P air switch are not included with the meterWorking conditionsOperating temperature 10 ~ +50 Working humidity: 10 ~ 80% (no condensation)Working pressure: 80 ~ 106kPaSun exposure: no direct exposure

• Ammeters
• 103VA AC 60-500V 1000A Digital Voltmeter Ammeter Din rail Volt Current Meter With CT Voltage Ampere Test Tool LED Amp tester